Power metal runs on the double bass drum: a steady stream of kicks under big, open choruses. It is what makes the songs feel like they are charging forward. It is also where programmed drums sound most like a machine gun, because sixteen identical kicks a bar is exactly what a machine would play.
This post covers the main double-bass patterns, the speed they are played at, and a played run from Power Metal Essentials, with every kick measured.
In this post:
- Three double-bass patterns
- How fast the feet go
- A played double-bass run
- Programming double bass that sounds played
- Arranging with double bass
- Fills into the chorus
- What is in the pack
- Questions
Three double-bass patterns

- 16th-note double bass: both feet, every 16th note. The classic power metal engine, under choruses and fast verses.
- 8th-note double bass: half as many kicks. Still driving, with more room for the vocal and the bass guitar.
- Double-bass gallop: an 8th and two 16ths, over and over. It locks with galloping riffs and feels heroic rather than relentless.
Switching between these three is one of the easiest ways to shape a song: 8ths in the verse, 16ths in the chorus, a gallop for the riff after it.
How fast the feet go
With 16th-note double bass, the two feet share the notes, so each foot plays half of them:
| Tempo | 16th notes per second (both feet) | Each foot, per second |
|---|---|---|
| 140 BPM | 9.3 | 4.7 |
| 160 BPM | 10.7 | 5.3 |
| 180 BPM | 12.0 | 6.0 |
| 200 BPM | 13.3 | 6.7 |
Those numbers are why power metal double bass sounds so smooth when it is played, and so mechanical when it is programmed: at 12 notes a second, any repeated sound becomes a buzz. The answer is not fewer notes. It is notes that are not all the same.
A played double-bass run
This is double bass run 1.1, as played:

The kick plays every 16th note. Over it, the ride plays 8th notes, and in the first bar the snare lands on every beat except the first, which gets a crash. Now look at just the kicks of the first bar:

All sixteen are loud, between 99 and 123, and only one pair of neighbours match. That small, constant movement, the two feet never quite matching, is what turns a machine-gun buzz into a drummer.
Every groove in the packs was played by a drummer on an electronic kit and kept as MIDI, not typed in note by note.
Programming double bass that sounds played
- Pick a tight kick sound. A short kick with a clear click in its attack. A long, boomy kick smears at 12 notes a second.
- Give the kicks a range. Keep them loud (roughly 95 to 125) but different. Slightly stronger kicks on the beat and slightly softer ones in between is a good start.
- Two feet are not the same. Make every other kick a few steps softer, the way a weaker foot plays.
- Keep the timing tight. Move kicks by a few milliseconds at most; at these speeds more sounds sloppy.
- Leave room. Drop to 8th notes or a gallop in verses so the choruses hit harder when the 16ths come back.
- Check against the bass guitar. If the bass plays 8ths and the kick plays 16ths, make sure they agree on the beat.
Velocity matters more than timing for double bass. See how to make drum MIDI sound human for what we measured in played grooves.
What is in the pack
Power Metal Essentials has 110 MIDI files. The double-bass runs have their own folder (22 files), next to 20 open hi-hat grooves, 16 ride, 14 tom, 12 crash and 6 closed hi-hat grooves, plus 8 build-ups and 12 fills. That is a full power metal song: hats or ride for the verse, crash and double bass for the chorus, toms for the bridge, and a fill between each.
Arranging with double bass
Double bass works best when it comes and goes. A typical power metal song might use it like this:
| Section | Kick | Hands |
|---|---|---|
| Intro | Double-bass gallop or 16ths | Crashes, big and open |
| Verse | 8th notes, or a single kick with the riff | Hi-hat or ride |
| Pre-chorus | Build-up into 16ths | Toms or snare build |
| Chorus | 16th-note double bass | Crash on every beat or every 8th |
| Bridge | Half-time, sparse | Ride, or toms |
| Last chorus | 16ths again | Crashes, with a fill into it |
Fills into the chorus
The moment the double bass kicks in is the moment the song lifts, so the bar before it matters. A snare or tom fill that builds in velocity, ending with a crash and the first 16th-note kick together on beat 1, does most of the work. The pack’s 8 build-ups and 12 fills are made for exactly these moments.
Questions
How fast is power metal double bass?
Often somewhere around 160 to 200 BPM in 16th notes, which is 5 to 7 kicks a second per foot.
Do I need two kick drums to play double bass?
No. Most drummers use a double pedal on one kick drum. In MIDI, both feet play the same kick note (36).
Why does my programmed double bass sound like a machine gun?
Usually every kick has the same velocity and sits exactly on the grid. Give the kicks a range of velocities, a little softer on every other note, and use a tighter kick sound.
Should double bass play through the whole song?
Rarely. It works best when it comes and goes: 8th notes or a gallop in the verse make the 16th notes in the chorus feel bigger.
Power Metal Essentials gives you 22 played double-bass runs and 88 more grooves, build-ups and fills, all played on a real kit, so the kicks already breathe.
Power metal grooves and double bass runs
Power Metal Essentials - MIDI Pack · $18. Drum MIDI played by a real drummer, for any DAW and any drum VST.
See it and hear the demosAll the packs






